Welcome, nice build too.
Printable View
Welcome, nice build too.
Thank you :)
It.. Certainly does good Burnouts.. hahah!
So, the car is in the builders for some upgrades...
https://fbcdn-sphotos-e-a.akamaihd.n...11473687_n.jpg
Not much of an Update,
Been driving the car regulary for the last few months,
So much Win...
Took her for a 2200KM Round trip from Cooma, to Wangaratta then to Victoria and back to Sydney and she didn't miss a beat.
Transmission had a small flaring issue which was sorted by the boys at Preston's Automatics in VIC within 30min.. haha!
She got 12.8L/100 on the way down and 10.8L/100 on the way home once the transmission was fixed xD
While the 343 is doing its job, there is alot of weight to move! (Car and Driver LOL) .. So It looks like I may be replacing the block with something stronger
when the New Camshaft & Valve train kit arrives from FTI in the US. Since the new cam requires some heavy springs I have been looking at the Jesel Sportsman Shaft Rockers.. last thing I want is a Stud to snap in one
of my Many 'Spirited Drives' ..
Car has been a dream ever since I Removed the Quarterhorse Chip and resigned to flashing the EEC directly using some crafty ingenuity.. ;)
All Tuning to date has been done by Girch @ LSX Tuning and there are still more refinements available but once the Transmission Conversion takes place I may handle the reigns of Control over to a Haltech Elite PCM.
Just a Random shot!
Attachment 788
Well,
If anyone is interested,
I am selling this Bottom end with a Stock Camshaft as I am moving onto something bigger and better! (Hopefully lol)
New Project so far..
https://fbcdn-sphotos-e-a.akamaihd.n...bd81a20f28cb4d
https://fbcdn-sphotos-b-a.akamaihd.n...aa9d29ff0b0e54
https://scontent-b-hkg.xx.fbcdn.net/...8f&oe=551E3D2C
https://scontent-a-hkg.xx.fbcdn.net/...9d&oe=54FF216C
https://fbcdn-sphotos-g-a.akamaihd.n...3b5bedd3a0ed9b
https://scontent-a-hkg.xx.fbcdn.net/...7a&oe=55039355
https://fbcdn-sphotos-e-a.akamaihd.n...5e6992f846f73a
https://scontent-a-hkg.xx.fbcdn.net/...9c&oe=550C2BCF
Plan is a 363 Short Deck windsor,
4.125 Bore
3.4 Stroke
5.4 Rod
CUstom Solid Roller
AFR Heads
Nathan
New ECU!
https://fbcdn-sphotos-b-a.akamaihd.n...77472a943300a0
Then Everything Else started!
https://fbcdn-sphotos-c-a.akamaihd.n...4670f094db4a24
Had Plenty of EEC's laying about so I Sacrificed one for the main 104 Pin Socket.
Then Started Soldering the Patch Harness together!
https://fbcdn-sphotos-e-a.akamaihd.n...3832612e598b90
Used one of my Spare EEC Harnesses as well and used it for the Correct Colour Coding
https://fbcdn-sphotos-b-a.akamaihd.n...576c92f9fc92de
Stage I Complete... Fitted to Car and Ran and drove it about for 2 days .. No Issues!
https://fbcdn-sphotos-f-a.akamaihd.n...764fc3eb65d836
This is the Completed Haltech Patch Loom, Excluding all the Braided Wire Covering
https://fbcdn-sphotos-d-a.akamaihd.n...cd831a14c960e7
LS Coil Looms Completed
All 3mm Wiiring
https://scontent-b-lax.xx.fbcdn.net/...a3&oe=55219DE2
Now All I am waiting for is The Engine Builder to finish welding the mounts on my spare rocker covers so we can mount the coil brackets
Fuel Pressure will be raised to 58PSI to Help with Fuel Atomisation and make way in the future for the Nitrous 364 Motor
Will get this up and running and then I'll start on getting the new Transmission Stripped down and the Bell housing milled off
Rocker Covers have been Completed..
LS2 Coils mounted and Ready for Action
https://scontent-a-sjc.xx.fbcdn.net/...5a&oe=553601CC
https://scontent-a-sjc.xx.fbcdn.net/...89&oe=55434B78
https://fbcdn-sphotos-e-a.akamaihd.n...7c49685a58334b
https://fbcdn-sphotos-a-a.akamaihd.n...5d3d5ed68ad5e4
https://scontent-b-sjc.xx.fbcdn.net/...d3&oe=55318BD6
https://fbcdn-sphotos-g-a.akamaihd.n...e8f0615c637fcf
Engine all wired back up!
https://fbcdn-sphotos-e-a.akamaihd.n...a21b2afd48c5d0
and running!
https://www.youtube.com/watch?v=8hGGbT7ywyw
call me weird, but there's some thing sexy about a virgin block arriving in a crate for the first time.......lol
looks like cool fun building that up ..
Yeah the build will be fun,
I asked for a 500 Shot of Nitrous ontop of the 12:1 E85 Motor...
Builder is saying it should handle a 900 Shot!
Got more goodies arriving soon, which include Jesel roller rockers, custom Ed Curtis Camshaft and a few other things!
I Did the whole Haltech ECU Conversion so I can just get it tuned once and for all with no flashing required!